| pds | R Documentation |
The pds function performs Piecewise Direct Standardization (PDS), a method
proposed by Wang et al. (1991) to transfer spectra from
one instrument to another. Optionally, the local models can be blended with
a global PLSR model (direct standardization), which can lead to better
transfer performance when the instrumental differences are not purely local.
pds(x1, x2, win = 5, ncomp = 2, alpha = 0)
x1 |
A matrix or data frame containing spectra acquired with the primary (reference) instrument. |
x2 |
A matrix or data frame containing spectra of the same samples acquired with the secondary instrument, to be standardized. |
win |
An integer specifying the half size of the moving window used for PLSR. A larger value may improve the transfer but will increase computational time. Default is 5. |
ncomp |
An integer specifying the number of components to be used in PLSR. Typically, a small number (e.g., 2-5) is sufficient. Default is 2. |
alpha |
A numeric value between 0 and 1 specifying the weight for the global PLSR model. A value of 0 (default) corresponds to the original PDS method, while a value of 1 corresponds to using only the global PLSR model. |
For each wavelength j of the primary (reference) instrument, a PLSR model
is fitted between the response of the primary instrument at j and the
responses of the secondary instrument in the window [j - win, j + win]
(truncated at the edges of the spectrum). The regression coefficients are
stored in a banded transfer matrix \textbf{F}, and the intercepts in a
vector \textbf{b}_0. Spectra measured on the secondary instrument are then
standardized as
\textbf{X}_{2,std} = \textbf{X}_2 \textbf{F} + \textbf{1}\textbf{b}_0^T
When alpha > 0, a global PLSR model mapping the whole secondary spectrum to
the whole primary spectrum is also fitted, and the transfer matrix and
intercept are (1 - \alpha) times the local ones plus \alpha
times the global ones.
An object of class specproc_transfer, a list with
transfer_matrix |
The |
intercept |
A vector of length |
and the settings of the transfer. Use predict() to transfer secondary spectra.
Christian L. Goueguel
Wang, Y., Veltkamp, D.J., Kowalski, B.R., (1991). Multivariate instrument standardization. Analytical Chemistry, 63(23):2750-2756.
Bouveresse, E., Massart, D.L., (1996). Improvement of the piecewise direct standardization procedure for the transfer of NIR spectra for multivariate calibration. Chemometrics and Intelligent Laboratory Systems, (32)2:201-213.
ds(), sst(), slope_bias(), predict.specproc_transfer()
data(forageLIBS)
wl <- suppressWarnings(as.numeric(names(forageLIBS)))
spectra <- forageLIBS[which(wl > 760 & wl < 780)] # the K I resonance lines
# a second instrument, with a shifted and less sensitive response
x1 <- as.matrix(spectra[1:30, ])
x2 <- 0.8 * cbind(x1[, -1], x1[, ncol(x1)]) + 50
res <- pds(x1, x2, win = 3, ncomp = 2)
# spectra of the second instrument transferred to the first one
transferred <- predict(res, x2)
max(abs(transferred - x1)) / max(x1)
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.