View source: R/voigt_profile.R
| voigt_profile | R Documentation |
Computes the exact Voigt profile, the convolution of a Gaussian and a Lorentzian profile. In laser-induced plasmas, the Gaussian component typically reflects Doppler and instrumental broadening, and the Lorentzian component Stark (pressure) and natural broadening.
voigt_profile(x, y0, xc, wG, wL, A)
x |
A numeric vector representing the independent variable (e.g., wavelength). |
y0 |
A numeric value specifying the baseline offset. |
xc |
A numeric value representing the center of the peak. |
wG |
A non-negative numeric value specifying the Gaussian full width at half maximum (FWHM). |
wL |
A non-negative numeric value specifying the Lorentzian FWHM. |
A |
A numeric value representing the peak area. |
The Voigt function is defined as:
y = y_0 + A \int_{-\infty}^{\infty} G(t; w_G)\, L(x - x_c - t; w_L)\, dt
= y_0 + A \frac{\mathrm{Re}[w(z)]}{\sigma\sqrt{2\pi}}, \quad
z = \frac{x - x_c + i\gamma}{\sigma\sqrt{2}}
where w(z) = e^{-z^2}\mathrm{erfc}(-iz) is the Faddeeva function,
\sigma = w_G / (2\sqrt{2\ln 2}) is the standard deviation of the
Gaussian component and \gamma = w_L / 2 is the half width at half
maximum of the Lorentzian component. Both components have unit area, so
A is the area of the line.
The Faddeeva function is evaluated in C++ with Weideman's (1994) rational
approximation using 32 terms. Its relative error is below 10^{-10}
over the range of widths met in emission spectroscopy. A width of zero gives
the pure Gaussian or pure Lorentzian profile. See pseudo_voigt_profile()
for the faster pseudo-Voigt approximation.
A numeric vector containing the values of the Voigt function
evaluated at the provided x values.
Christian L. Goueguel
Weideman, J.A.C., (1994). Computation of the complex error function. SIAM Journal on Numerical Analysis, 31(5):1497-1518.
Armstrong, B.H., (1967). Spectrum line profiles: the Voigt function. J. Quant. Spectrosc. Radiat. Transfer, 7(1):61-88.
pseudo_voigt_profile(), gaussian_profile(), lorentzian_profile(), peak_fit()
x <- seq(-3, 3, length.out = 200)
v <- voigt_profile(x, y0 = 0, xc = 0, wG = 1, wL = 0.5, A = 1)
pv <- pseudo_voigt_profile(x, y0 = 0, xc = 0, wG = 1, wL = 0.5, A = 1)$y
plot(x, v, type = "l", main = "Voigt vs pseudo-Voigt")
lines(x, pv, col = "red", lty = 2)
max(abs(v - pv)) / max(v) # pseudo-Voigt relative error
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.