knitr::opts_chunk$set(collapse = T, comment = "#>")
options(tibble.print_min = 4L, tibble.print_max = 4L)
library(dplyr)
set.seed(1014)

Most dplyr functions use non-standard evaluation (NSE). This is a catch-all term that means they don't follow the usual R rules of evaluation. Instead, they capture the expression that you typed and evaluate it in a custom way. This has two main benefits for dplyr code:

Unfortunately these benefits do not come for free. There are two main drawbacks:

Fortunately, dplyr provides tools to overcome these challenges. They require a little more typing, but a small amount of upfront work is worth it because they help you save time in the long run.

This vignette has two goals:

We'll start with a warmup, tying this problem to something you're more familiar with, then move on to some practical tools, then dive into the deeper theory.

Warm up

You might not have realised it, but you're already accomplished at solving this type of problem in another domain: strings. It's obvious that this function doesn't do what you want:

greet <- function(name) {
  "How do you do, name?"
}
greet("Hadley")

That's because " "quotes" its input: it doesn't interpret what you've typed, it just stores it in a string. One way to make the function do what you want is to use paste() to build up the string piece by piece:

greet <- function(name) {
  paste0("How do you do, ", name, "?")
}
greet("Hadley")

Another approach is exemplified by the glue package: it allows you to "unquote" components of a string, replacing the string with the value of the R expression. This allows an elegant implementation of our function because {name} is replaced with the value of the name argument.

greet <- function(name) {
  glue::glue("How do you do, {name}?")
}
greet("Hadley")

Programming recipes

The following recipes walk you through the basics of tidyeval, with the nominal goal of reducing duplication in dplyr code. The examples here are somewhat inauthentic because we've reduced them down to very simple components to make them easier to understand. They're so simple that you might wonder why we bother writing a function at all. But it's a good idea to learn the ideas on simple examples, so that you're better prepared to apply them to the more complex situations you'll see in your own code.

Different data sets

You already know how to write functions that work with the first argument of dplyr verbs: the data. That's because dplyr doesn't do anything special with that argument, so it's referentially transparent. For example, if you saw repeated code like this:

mutate(df1, y = a + x)
mutate(df2, y = a + x)
mutate(df3, y = a + x)
mutate(df4, y = a + x)

You could already write a function to capture that duplication:

mutate_y <- function(df) {
  mutate(df, y = a + x)
}

Unfortunately, there's a drawback to this simple approach: it can fail silently if one of the variables isn't present in the data frame, but is present in the global environment.

df1 <- tibble(x = 1:3)
a <- 10
mutate_y(df1)

We can fix that ambiguity by being more explicit and using the .data pronoun. This will throw an informative error if the variable doesn't exist:

mutate_y <- function(df) {
  mutate(df, y = .data$a + .data$x)
}

mutate_y(df1)

If this function is in a package, using .data also prevents R CMD check from giving a NOTE about undefined global variables (provided that you've also imported rlang::.data with @importFrom rlang .data).

Different expressions

Writing a function is hard if you want one of the arguments to be a variable name (like x) or an expression (like x + y). That's because dplyr automatically "quotes" those inputs, so they are not referentially transparent. Let's start with a simple case: you want to vary the grouping variable for a data summarization.

df <- tibble(
  g1 = c(1, 1, 2, 2, 2),
  g2 = c(1, 2, 1, 2, 1),
  a = sample(5),
  b = sample(5)
)

df %>%
  group_by(g1) %>%
  summarise(a = mean(a))

df %>%
  group_by(g2) %>%
  summarise(a = mean(a))

You might hope that this will work:

my_summarise <- function(df, group_var) {
  df %>%
    group_by(group_var) %>%
    summarise(a = mean(a))
}

my_summarise(df, g1)

But it doesn't.

Maybe providing the variable name as a string will fix things?

my_summarise(df, "g2")

Nope.

If you look carefully at the error message, you'll see that it's the same in both cases. group_by() works like ": it doesn't evaluate its input; it quotes it.

To make this function work, we need to do two things. We need to quote the input ourselves (so my_summarise() can take a bare variable name like group_by()), and then we need to tell group_by() not to quote its input (because we've done the quoting).

How do we quote the input? We can't use "" to quote the input, because that gives us a string. Instead we need a function that captures the expression and its environment (we'll come back to why this is important later on). There are two possible options we could use in base R, the function quote() and the operator ~. Neither of these work quite the way we want, so we need a new function: quo().

quo() works like ": it quotes its input rather than evaluating it.

quo(g1)
quo(a + b + c)
quo("a")

quo() returns a quosure, which is a special type of formula. You'll learn more about quosures later on.

Now that we've captured this expression, how do we use it with group_by()? It doesn't work if we just shove it into our naive approach:

my_summarise(df, quo(g1))

We get the same error as before, because we haven't yet told group_by() that we're taking care of the quoting. In other words, we need to tell group_by() not to quote its input, because it has been pre-quoted by my_summarise(). Yet another way of saying the same thing is that we want to unquote group_var.

In dplyr (and in tidyeval in general) you use !! to say that you want to unquote an input so that it's evaluated, not quoted. This gives us a function that actually does what we want.

my_summarise <- function(df, group_var) {
  df %>%
    group_by(!! group_var) %>%
    summarise(a = mean(a))
}

my_summarise(df, quo(g1))

Huzzah!

There's just one step left: we want to call this function like we call group_by():

my_summarise(df, g1)

This doesn't work because there's no object called g1. We need to capture what the user of the function typed and quote it for them. You might try using quo() to do that:

my_summarise <- function(df, group_var) {
  quo_group_var <- quo(group_var)
  print(quo_group_var)

  df %>%
    group_by(!! quo_group_var) %>%
    summarise(a = mean(a))
}

my_summarise(df, g1)

I've added a print() call to make it obvious what's going wrong here: quo(group_var) always returns ~group_var. It is being too literal! We want it to substitute the value that the user supplied, i.e. to return ~g1.

By analogy to strings, we don't want "", instead we want some function that turns an argument into a string. That's the job of enquo(). enquo() uses some dark magic to look at the argument, see what the user typed, and return that value as a quosure. (Technically, this works because function arguments are evaluated lazily, using a special data structure called a promise.)

my_summarise <- function(df, group_var) {
  group_var <- enquo(group_var)
  print(group_var)

  df %>%
    group_by(!! group_var) %>%
    summarise(a = mean(a))
}

my_summarise(df, g1)

(If you're familiar with quote() and substitute() in base R, quo() is equivalent to quote() and enquo() is equivalent to substitute().)

You might wonder how to extend this to handle multiple grouping variables: we'll come back to that a little later.

Different input variable

Now let's tackle something a bit more complicated. The code below shows a duplicate summarise() statement where we compute three summaries, varying the input variable.

summarise(df, mean = mean(a), sum = sum(a), n = n())
summarise(df, mean = mean(a * b), sum = sum(a * b), n = n())

To turn this into a function, we start by testing the basic approach interactively: we quote the variable with quo(), then unquoting it in the dplyr call with !!. Notice that we can unquote anywhere inside a complicated expression.

my_var <- quo(a)
summarise(df, mean = mean(!! my_var), sum = sum(!! my_var), n = n())

You can also wrap quo() around the dplyr call to see what will happen from dplyr's perspective. This is a very useful tool for debugging.

quo(summarise(df,
  mean = mean(!! my_var),
  sum = sum(!! my_var),
  n = n()
))

Now we can turn our code into a function (remembering to replace quo() with enquo()), and check that it works:

my_summarise2 <- function(df, expr) {
  expr <- enquo(expr)

  summarise(df,
    mean = mean(!! expr),
    sum = sum(!! expr),
    n = n()
  )
}
my_summarise2(df, a)
my_summarise2(df, a * b)

Different input and output variable

The next challenge is to vary the name of the output variables:

mutate(df, mean_a = mean(a), sum_a = sum(a))
mutate(df, mean_b = mean(b), sum_b = sum(b))

This code is similar to the previous example, but there are two new wrinkles:

my_mutate <- function(df, expr) {
  expr <- enquo(expr)
  mean_name <- paste0("mean_", quo_name(expr))
  sum_name <- paste0("sum_", quo_name(expr))

  mutate(df,
    !! mean_name := mean(!! expr),
    !! sum_name := sum(!! expr)
  )
}

my_mutate(df, a)

Capturing multiple variables

It would be nice to extend my_summarise() to accept any number of grouping variables. We need to make three changes:

my_summarise <- function(df, ...) {
  group_var <- enquos(...)

  df %>%
    group_by(!!! group_var) %>%
    summarise(a = mean(a))
}

my_summarise(df, g1, g2)

!!! takes a list of elements and splices them into to the current call. Look at the bottom of the !!! and think ....

args <- list(na.rm = TRUE, trim = 0.25)
quo(mean(x, !!! args))

args <- list(quo(x), na.rm = TRUE, trim = 0.25)
quo(mean(!!! args))

Now that you've learned the basics of tidyeval through some practical examples, we'll dive into the theory. This will help you generalise what you've learned here to new situations.

Quoting

Quoting is the action of capturing an expression instead of evaluating it. All expression-based functions quote their arguments and get the R code as an expression rather than the result of evaluating that code. If you are an R user, you probably quote expressions on a regular basis. One of the most important quoting operators in R is the formula. It is famously used for the specification of statistical models:

disp ~ cyl + drat

The other quoting operator in base R is quote(). It returns a raw expression rather than a formula:

# Computing the value of the expression:
toupper(letters[1:5])

# Capturing the expression:
quote(toupper(letters[1:5]))

(Note that despite being called the double quote, " is not a quoting operator in this context, because it generates a string, not an expression.)

In practice, the formula is the better of the two options because it captures the code and its execution environment. This is important because even simple expression can yield different values in different environments. For example, the x in the following two expressions refers to different values:

f <- function(x) {
  quo(x)
}

x1 <- f(10)
x2 <- f(100)

It might look like the expressions are the same if you print them out.

x1
x2

But if you inspect the environments using rlang::get_env() --- they're different.

library(rlang)

get_env(x1)
get_env(x2)

Further, when we evaluate those formulas using rlang::eval_tidy(), we see that they yield different values:

eval_tidy(x1)
eval_tidy(x2)

This is a key property of R: one name can refer to different values in different environments. This is also important for dplyr, because it allows you to combine variables and objects in a call:

user_var <- 1000
mtcars %>% summarise(cyl = mean(cyl) * user_var)

When an object keeps track of an environment, it is said to have an enclosure. This is the reason that functions in R are sometimes referred to as closures:

typeof(mean)

For this reason we use a special name to refer to one-sided formulas: quosures. One-sided formulas are quotes (they carry an expression) with an environment.

Quosures are regular R objects. They can be stored in a variable and inspected:

var <- ~toupper(letters[1:5])
var

# You can extract its expression:
get_expr(var)

# Or inspect its enclosure:
get_env(var)

Quasiquotation

Put simply, quasi-quotation enables one to introduce symbols that stand for a linguistic expression in a given instance and are used as that linguistic expression in a different instance. --- Willard van Orman Quine

Automatic quoting makes dplyr very convenient for interactive use. But if you want to program with dplyr, you need some way to refer to variables indirectly. The solution to this problem is quasiquotation, which allows you to evaluate directly inside an expression that is otherwise quoted.

Quasiquotation was coined by Willard van Orman Quine in the 1940s, and was adopted for programming by the LISP community in the 1970s. All expression-based functions in the tidyeval framework support quasiquotation. Unquoting cancels quotation of parts of an expression. There are three types of unquoting:

Unquoting

The first important operation is the basic unquote, which comes in a functional form, UQ(), and as syntactic-sugar, !!.

# Here we capture `letters[1:5]` as an expression:
quo(toupper(letters[1:5]))

# Here we capture the value of `letters[1:5]`
quo(toupper(!! letters[1:5]))
quo(toupper(UQ(letters[1:5])))

It is also possible to unquote other quoted expressions. Unquoting such symbolic objects provides a powerful way of manipulating expressions.

var1 <- quo(letters[1:5])
quo(toupper(!! var1))

You can safely unquote quosures because they track their environments, and tidyeval functions know how to evaluate them. This allows any depth of quoting and unquoting.

my_mutate <- function(x) {
  mtcars %>%
    select(cyl) %>%
    slice(1:4) %>%
    mutate(cyl2 = cyl + (!! x))
}

f <- function(x) quo(x)
expr1 <- f(100)
expr2 <- f(10)

my_mutate(expr1)
my_mutate(expr2)

The functional form is useful in cases where the precedence of ! causes problems:

my_fun <- quo(fun)
quo(!! my_fun(x, y, z))
quo(UQ(my_fun)(x, y, z))

my_var <- quo(x)
quo(filter(df, !! my_var == 1))
quo(filter(df, UQ(my_var) == 1))

Unquote-splicing

The second unquote operation is unquote-splicing. Its functional form is UQS() and the syntactic shortcut is !!!. It takes a vector and inserts each element of the vector in the surrounding function call:

quo(list(!!! letters[1:5]))

A very useful feature of unquote-splicing is that the vector names become argument names:

x <- list(foo = 1L, bar = quo(baz))
quo(list(!!! x))

This makes it easy to program with dplyr verbs that take named dots:

args <- list(mean = quo(mean(cyl)), count = quo(n()))
mtcars %>%
  group_by(am) %>%
  summarise(!!! args)

Setting variable names

The final unquote operation is setting argument names. You've seen one way to do that above, but you can also use the definition operator := instead of =. := supports unquoting on both the LHS and the RHS.

The rules on the LHS are slightly different: the unquoted operand should evaluate to a string or a symbol.

mean_nm <- "mean"
count_nm <- "count"

mtcars %>%
  group_by(am) %>%
  summarise(
    !! mean_nm := mean(cyl),
    !! count_nm := n()
  )


jlaffy/scrabble documentation built on Nov. 16, 2019, 7:56 a.m.