Introduction to Time Series

DataRobot now includes the ability to make time series projects via the API.

Time series projects, like OTV projects, use datetime partitioning, and all the workflow changes that apply to other datetime partitioned projects also apply to them. Unlike other projects, time series projects produce different types of models which forecast multiple future predictions instead of an individual prediction for each row.

DataRobot uses a general time series framework to configure how time series features are created and what future values the models will output. This framework consists of a Forecast Point (defining a time a prediction is being made), a Feature Derivation Window (a rolling window used to create features), and a Forecast Window (a rolling window of future values to predict). These components are described in more detail below.

Time series projects will automatically transform the dataset provided in order to apply this framework. During the transformation, DataRobot uses the Feature Derivation Window to derive time series features (such as lags and rolling statistics), and uses the Forecast Window to provide examples of forecasting different distances in the future (such as time shifts). After project creation, a new dataset and a new feature list are generated and used to train the models. This process is reapplied automatically at prediction time as well in order to generate future predictions based on the original data features.

The timeUnit and timeStep used to define the Feature Derivation and Forecast Windows are taken from the datetime partition column, and can be retrieved for a given column in the input data by using GetFeatureInfo.

Setting Up A Time Series Project

To set up a time series project, use the new time series specific parameters found in CreateDatetimePartitionSpecification:

When using datasets to a time series project, the dataset might look something like the following, if time is the datetime partition column, target is the target column, and temp is an input feature. If the dataset was uploaded with a forecast point of "2017-01-08" and during partitioning the feature derivation window start and end were set to -5 and -3 and the forecast window start and end were set to 1 and 3, then rows 1 through 3 are historical data, row 6 is the forecast point, and rows 7 though 9 are forecast rows that will have predictions when predictions are computed.

library(knitr)
data <- data.frame(row = seq(9),
                   time = as.Date("2017-01-02") + seq(9),
                   target = c(16443, 3013, 1643, rep(NA, 6)),
                   temp = c(72, 72, 68, rep(NA, 6)))
kable(data)

On the other hand, if the project instead used holiday as a known in advance input feature, the uploaded dataset might look like the following:

library(knitr)
data <- data.frame(row = seq(9),
                   time = as.Date("2017-01-02") + seq(9),
                   target = c(16443, 3013, 1643, rep(NA, 6)),
                   holiday = c(TRUE, rep(FALSE, 5), TRUE, rep(FALSE, 2)))
kable(data)

Here's a simple example of using this data in a time series project:

partition <- CreateDatetimePartitionSpecification(datetimePartitionColumn = "timestamp",
                                                  useTimeSeries = TRUE)
StartProject(dataSource = data, target = "target", partition = partition, metric = "RMSE")

Feature Derivation Window

The Feature Derivation window represents the rolling window that is used to derive time series features and lags, relative to the Forecast Point. It is defined in terms of featureDerivationWindowStart and featureDerivationWindowEnd which are integer values representing datetime offsets in terms of the timeUnit (e.g. hours or days).

The Feature Derivation Window start and end must be less than or equal to zero, indicating they are positioned before the forecast point. Additionally, the window must be specified as an integer multiple of the timeStep which defines the expected difference in time units between rows in the data.

Enough rows of historical data must be provided to cover the span of the effective Feature Derivation Window (which may be longer than the project's Feature Derivation Window depending on the differencing settings chosen). The effective Feature Derivation Window of any model can be checked via the effectiveFeatureDerivationWindowStart and effectiveFeatureDerivationWindowEnd attributes of a datetime model. See GetDatetimeModel.

The window is closed, meaning the edges are considered to be inside the window.

This information is added to your CreateDatetimePartitionSpecification call like so:

partition <- CreateDatetimePartitionSpecification(datetimePartitionColumn = "timestamp",
                                                  featureDerivationWindowStart = -24,
                                                  featureDerivationWindowEnd = -12,
                                                  useTimeSeries = TRUE)

Forecast Window

The Forecast Window represents the rolling window of future values to predict, relative to the Forecast Point. It is defined in terms of the forecastWindowStart and forecastWindowEnd, which are positive integer values indicating datetime offsets in terms of the timeUnit (e.g. hours or days).

The Forecast Window start and end must be positive integers, indicating they are positioned after the forecast point. Additionally, the window must be specified as an integer multiple of the timeStep which defines the expected difference in time units between rows in the data.

The window is closed, meaning the edges are considered to be inside the window.

This information is added to your CreateDatetimePartitionSpecification call like so:

partition <- CreateDatetimePartitionSpecification(datetimePartitionColumn = "timestamp",
                                                  forecastWindowStart = 1,
                                                  forecastWindowEnd = 10,
                                                  useTimeSeries = TRUE)

Modeling Data and Time Series Features

In time series projects, a new set of modeling features is created after setting the partitioning options. If a featurelist is specified with the partitioning options, it will be used to select which features should be used to derived modeling features; if a featurelist is not specified, the default featurelist will be used.

These features are automatically derived from those in the project's dataset and are the features used for modeling - note that ListFeaturelists and ListModelingFeaturelists will return different data in time series projects. Modeling featurelists are the ones that can be used for modeling and will be accepted by the backend, while regular featurelists will continue to exist but cannot be used. Modeling features are only accessible once the target and partitioning options have been set. In projects that don't use time series modeling, once the target has been set, both modeling and regular features and featurelists will behave the same.

Making Predictions

Prediction datasets are uploaded as normal predictions. However, when uploading a prediction dataset, a new parameter forecastPoint can be specified. The forecast point of a prediction dataset identifies the point in time relative which predictions should be generated, and if one is not specified when uploading a dataset, the server will choose the most recent possible forecast point. The forecast window specified when setting the partitioning options for the project determines how far into the future from the forecast point predictions should be calculated.

For example:

predictions <- Predict(timeSeriesModel, testData, forecastPoint = "1958-01-01")

Feature Settings

When setting up a time series project, input features could be identified as known in advance features. These features are not used to generate lags, and are expected to be known for the rows in the forecast window at predict time (e.g. "how much money will have been spent on marketing", "is this a holiday").

To start a time series project, use CreateDatetimePartitionSpecification and specify the feaureSettings. (Note that this is for illustrative purposes only - this project will not actually build because the 10 data points are smaller than the 100 datapoint minimum required.)

partition <- CreateDatetimePartitionSpecification(datetimePartitionColumn = "timestamp",
                                                  useTimeSeries = TRUE,
                                                  featureSettings = list("featureName" = "holiday",
                                                                         "knownInAdvance" = TRUE))
project <- StartProject(data,
                        projectName = "test-TimeSeries",
                        target = "target",
                        partition = partition,
                        metric = "RMSE")

If you have another known in advance feature (e.g., weekend), just add it to feature settings as a list of lists:

partition <- CreateDatetimePartitionSpecification(datetimePartitionColumn = "timestamp",
                                                  useTimeSeries = TRUE,
                                                  featureSettings = list(list("featureName" = "holiday",
                                                                              "knownInAdvance" = TRUE),
                                                                         list("featureName" = "weekend",
                                                                              "knownInAdvance" = TRUE)))

Formatting Durations

Some parts of time series require specifying durations. When date ranges are specified with a start and an end date, the end date is exclusive, so only dates earlier than the end date are included, but the start date is inclusive, so dates equal to or later than the start date are included. If the start and end date are the same, then no dates are included in the range.

Durations are specified using a subset of ISO8601. Durations will be of the form PnYnMnDTnHnMnS where each “n” may be replaced with an integer value. Within the duration string,

Example Durations:

Multiseries

The API also supports multiseries, or data with multiple time series delineated by multiseries ID columns. To create this, create a project, then create a datetime partition specification that specifies the datetimePartitionColumn (the column with your date in it) and the multiseriesIdColumns (a list of columns specifying the ids that delineate the multiseries).

data <- read.csv(system.file("extdata", "multiseries.csv", package = "datarobot"))
partition <- CreateDatetimePartitionSpecification(datetimePartitionColumn = "timestamp",
                                                  useTimeSeries = TRUE,
                                                  multiseriesIdColumns = "series_id")
project <- StartProject(data,
                        projectName = "test-TimeSeries",
                        target = "target",
                        partition = partition,
                        metric = "RMSE",
                        mode = AutopilotMode$Manual,
                        targetType = "Regression")

Prediction Intervals

For each model, prediction intervals estimate the range of values DataRobot expects actual values of the target to fall within. They are similar to a confidence interval of a prediction, but are based on the residual errors measured during the backtesting for the selected model.

Note that because calculation depends on the backtesting values, prediction intervals are not available for predictions on models that have not had all backtests completed. Additionally, prediction intervals are not available when the number of points per forecast distance is less than 10, due to insufficient data.

In a prediction request, users can specify a prediction intervals size, which specifies the desired probability of actual values falling within the interval range. Larger values are less precise, but more conservative. For example, specifying a size of 80 will result in a lower bound of 10% and an upper bound of 90%. More generally, for a specific predictionIntervalsSize, the upper and lower bounds will be calculated as follows:

To view prediction intervals data for a prediction, the prediction needs to have been created using Predict and specifying includePredictionIntervals = TRUE. The size for the prediction interval can be specified with the predictionIntervalsSize parameter for the same function, and will default to 80 if left unspecified. Specifying these fields will result in prediction interval bounds being included in the retrieved prediction data for that request. See Predict for more details.

Disabling Derived Features

DataRobot does a lot of good work to automatically derive features that may be useful (e.g., lags). You can always see these features clearly by calling GetTimeSeriesFeatureDerivationLog. However, from time to time, it may be useful to disable DataRobot's automatic feature engineering for a particular feature (e.g., so you can derive lags yourself manually). To do this, we can use the featureSettings to turn off derived features for a particular base feature:

partition <- CreateDatetimePartitionSpecification(datetimePartitionColumn = "timestamp",
                                                  useTimeSeries = TRUE,
                                                  featureSettings = list(list("featureName" = "sales",
                                                                              "doNotDerive" = TRUE)))


Try the datarobot package in your browser

Any scripts or data that you put into this service are public.

datarobot documentation built on May 29, 2024, 4:36 a.m.