Nothing
# cheby2.R
# Copyright (C) 2019 Geert van Boxtel <gjmvanboxtel@gmail.com>
# Octave signal package:
# Copyright (C) 1999 Paul Kienzle <pkienzle@users.sf.net>
# Copyright (C) 2003 Doug Stewart <dastew@sympatico.ca>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING. If not, see
# <https://www.gnu.org/licenses/>.
#
# 20200519 Geert van Boxtel First version for v0.1.0
# 20200708 GvB renamed IIRfspec to FilterSpecs
# 20210308 GvB added output parameter
#------------------------------------------------------------------------------
#' Chebyshev Type II filter design
#'
#' Compute the transfer function coefficients of a Chebyshev Type II filter.
#'
#' Chebyshev filters are analog or digital filters having a steeper roll-off
#' than Butterworth filters, and have passband ripple (type I) or stopband
#' ripple (type II).
#'
#' Because \code{cheby2} is generic, it can be extended to accept other inputs,
#' using \code{cheb2ord} to generate filter criteria for example.
#'
#' @param n filter order.
#' @param Rs dB of stopband ripple.
#' @param w critical frequencies of the filter. \code{w} must be a scalar for
#' low-pass and high-pass filters, and \code{w} must be a two-element vector
#' c(low, high) specifying the lower and upper bands in radians/second. For
#' digital filters, W must be between 0 and 1 where 1 is the Nyquist
#' frequency.
#' @param type filter type, one of \code{"low"}, \code{"high"}, \code{"stop"},
#' or \code{"pass"}.
#' @param plane "z" for a digital filter or "s" for an analog filter.
#' @param output Type of output, one of:
#' \describe{
#' \item{"Arma"}{Autoregressive-Moving average (aka numerator/denominator, aka
#' b/a)}
#' \item{"Zpg"}{Zero-pole-gain format}
#' \item{"Sos"}{Second-order sections}
#' }
#' Default is \code{"Arma"} compatibility with the 'signal' package and the
#' 'Matlab' and 'Octave' equivalents, but \code{"Sos"} should be preferred for
#' general-purpose filtering because of numeric stability.
#' @param ... additional arguments passed to cheby1, overriding those given by
#' \code{n} of class \code{FilterSpecs}.
#'
#' @return Depending on the value of the \code{output} parameter, a list of
#' class \code{\link{Arma}}, \code{\link{Zpg}}, or \code{\link{Sos}}
#' containing the filter coefficients
#'
#' @examples
#' ## compare the frequency responses of 5th-order
#' ## Butterworth and Chebyshev filters.
#' bf <- butter(5, 0.1)
#' cf <- cheby2(5, 20, 0.1)
#' bfr <- freqz(bf)
#' cfr <- freqz(cf)
#' plot(bfr$w / pi, 20 * log10(abs(bfr$h)), type = "l", ylim = c(-40, 0),
#' xlim = c(0, .5), xlab = "Frequency", ylab = c("dB"))
#' lines(cfr$w / pi, 20 * log10(abs(cfr$h)), col = "red")
#'
#' # compare type I and type II Chebyshev filters.
#' c1fr <- freqz(cheby1(5, .5, 0.5))
#' c2fr <- freqz(cheby2(5, 20, 0.5))
#' plot(c1fr$w / pi, abs(c1fr$h), type = "l", ylim = c(0, 1.1),
#' xlab = "Frequency", ylab = c("Magnitude"))
#' lines(c2fr$w / pi, abs(c2fr$h), col = "red")
#'
#' @references \url{https://en.wikipedia.org/wiki/Chebyshev_filter}
#'
#' @seealso \code{\link{Arma}}, \code{\link{filter}}, \code{\link{butter}},
#' \code{\link{ellip}}, \code{\link{cheb2ord}}
#'
#' @author Paul Kienzle, \email{pkienzle@@users.sf.net},\cr
#' Doug Stewart, \email{dastew@@sympatico.ca}.\cr
#' Conversion to R Tom Short,\cr
#' adapted by Geert van Boxtel, \email{G.J.M.vanBoxtel@@gmail.com}.
#'
#' @rdname cheby2
#' @export
cheby2 <- function(n, ...) UseMethod("cheby2")
#' @rdname cheby2
#' @export
cheby2.FilterSpecs <- function(n, ...)
cheby2(n$n, n$Rs, n$Wc, n$type, n$plane, ...)
#' @rdname cheby2
#' @export
cheby2.default <- function(n, Rs, w, type = c("low", "high", "stop", "pass"),
plane = c("z", "s"),
output = c("Arma", "Zpg", "Sos"), ...) {
# check input arguments
type <- match.arg(type)
plane <- match.arg(plane)
output <- match.arg(output)
if (!isPosscal(n) || !isWhole(n)) {
stop("filter order n must be a positive integer")
}
if (!isPosscal(Rs) || !is.numeric(Rs)) {
stop("passband ripple Rs must a non-negative scalar")
}
stop <- type == "stop" || type == "high"
digital <- plane == "z"
if (!is.vector(w) || (length(w) != 1 && length(w) != 2)) {
stop(paste("frequency w must be specified as a vector of length 1 or 2",
"(either w0 or c(w0, w1))"))
}
if ((type == "stop" || type == "pass") && length(w) != 2) {
stop("w must be two elements for stop and bandpass filters")
}
if (digital && !all(w >= 0 & w <= 1)) {
stop("critical frequencies w must be in the range [0 1]")
} else if (!digital && !all(w >= 0)) {
stop("critical frequencies w must be in the range [0 Inf]")
}
## Prewarp to the band edges to s plane
if (digital) {
T <- 2 # sampling frequency of 2 Hz
w <- 2 / T * tan(pi * w / T)
}
## Generate splane poles and zeros for the chebyshev type 2 filter
## From: Stearns, SD; David, RA; (1988). Signal Processing Algorithms.
## New Jersey: Prentice-Hall.
C <- 1 # default cutoff frequency
lambda <- 10 ^ (Rs / 20)
phi <- log(lambda + sqrt(lambda^2 - 1)) / n
theta <- pi * ((1:n) - 0.5) / n
alpha <- -sinh(phi) * sin(theta)
beta <- cosh(phi) * cos(theta)
if (n %% 2) {
## drop theta==pi/2 since it results in a zero at infinity
zero <- 1i * C / cos(theta[c(1:((n - 1) / 2), ((n + 3) / 2):n)])
}else {
zero <- 1i * C / cos(theta)
}
pole <- C / (alpha^2 + beta^2) * (alpha - 1i * beta)
## Compensate for amplitude at s=0
## Because of the vagaries of floating point computations, the
## prod(pole)/prod(zero) sometimes comes out as negative and
## with a small imaginary component even though analytically
## the gain will always be positive, hence the abs(Re(...))
gain <- abs(Re(prod(pole) / prod(zero)))
zpg <- Zpg(z = zero, p = pole, g = gain)
## splane frequency transform
zpg <- sftrans(zpg, w = w, stop = stop)
## Use bilinear transform to convert poles to the z plane
if (digital) {
zpg <- bilinear(zpg, T = T)
}
if (output == "Arma") {
retval <- as.Arma(zpg)
} else if (output == "Sos") {
retval <- as.Sos(zpg)
} else {
retval <- zpg
}
retval
}
Any scripts or data that you put into this service are public.
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.