knitr::opts_chunk$set( collapse = TRUE, comment = "#>" ) backup_option <- options() base_wd <- getwd() library(ggplot2)  Introduction The K-function is a method used in spatial Point Pattern Analysis (PPA) to inspect the spatial distribution of a set of points. It allows the user to assess if the set of points is more or less clustered that what we could expect from a given distribution. Most of the time, the set of point is compared with a random distribution. The empirical K-function for a specified radius$r$is calculated with the following formula: $$\hat{K}(r)=\frac{1}{n(n-1)} \sum_{i=1}^{n} \sum_{j=1 \atop j \neq i}^{n} \mathbf{1}\left{d_{i j} \leq r\right}$$ Basically, the K-function calculates for a radius$r$the proportion of cells with a value bellow$r$in the distance matrix between all the points$D_{ij}$. In other words, the K-function estimates "the average number of neighbours of a typical random point" [@baddeley2015spatial]. A modified version of the K-function is the G-function (Pair Correlation Function) [@stoyan1996estimating]. The regular K-function is calculated for subsequent disks with increasing radii and thus is cumulative in nature. The G-function uses rings instead of disks and permits the analysis of the points concentrations at different geographical scales. {width=45%} When the points are located on a network, the use of the Euclidean distance systematically underestimates the real distance between points. These two functions can be extended for network spaces by using the network distance instead of the Euclidean distance. The value of the empirical k function on a network is calculated with the following formula: $$\hat{K}(r)=\frac{1}{(n-1)/Lt} \sum_{i=1}^{n} \sum_{j=1 \atop j \neq i}^{n} \mathbf{1}\left{d_{i j} \leq r\right}$$ With$Lt$the total length of the network and$n$the number of events. The network K-function in spNetwork It is possible to calculate the K and G functions with spNetwork with the function kfunctions. The inference is based on Monte Carlo simulations. The observed K and G function are graphically compared to n simulated dataset for which the points are randomly located on the network. We present here a short example with the case of theatres and libraries in Montreal. load(system.file("extdata", "results_vignette_kfunc.rda", package = "spNetwork", mustWork = TRUE))  library(spNetwork) library(tmap) data(main_network_mtl) data(mtl_libraries) data(mtl_theatres) tm_shape(main_network_mtl) + tm_lines("black") + tm_shape(mtl_libraries) + tm_dots(col = "red", size = 0.2) + tm_shape(mtl_theatres) + tm_dots(col = "blue", size = 0.2)  As one can see, the theatres seems to be more clustered than the libraries. kfun_theatre <- kfunctions(main_network_mtl, mtl_theatres, start = 0, end = 5000, step = 50, width = 1000, nsim = 50, resolution = 50, verbose = FALSE, conf_int = 0.05) kfun_theatre$plotk

plot_df <- kfun_theatre$values ggplot(plot_df)+ geom_ribbon(aes_string(x = "distances", ymin="lower_k",ymax = "upper_k"), fill = grDevices::rgb(0.1,0.1,0.1), alpha=0.4)+ geom_path(aes_string(x = "distances", y = "lower_k"), col="black", linetype="dashed")+ geom_path(aes_string(x = "distances", y = "upper_k"), col="black", linetype="dashed")+ geom_path(aes_string(x = "distances", y = "obs_k"), col="blue")+ labs(x = "distances", y = "empirical K-function")  The blue line is the empirical network K-function of the theatres in Montreal. The gray area represents the results of the 50 simulations in the interval 2.5% - 97.5%. Because the blue line is way above the gray area, we can conclude that the theatres are more clustered than what we can expect from a random distribution. (Note: usually, more simulations are required for inference). kfun_theatre$plotg

ggplot(plot_df)+
geom_ribbon(aes_string(x = "distances", ymin="lower_g", ymax = "upper_g"),
fill = grDevices::rgb(0.1,0.1,0.1),alpha=0.4, )+
geom_path(aes_string(x = "distances", y = "lower_g"), col="black",
linetype="dashed")+
geom_path(aes_string(x = "distances", y = "upper_g"), col="black",
linetype="dashed")+
geom_path(aes_string(x = "distances", y = "obs_g"), col="blue")+
labs(x = "distances",
y = "empirical G-function")


The G-function is also indicating a clustering situation, which is maximum between two and three kilometres. This is consistent with the fact that we have a high concentration of theatres in the central neighbourhoods and then more dispersed points. We can perform the same analysis for libraries.

kfun_biblio <- kfunctions(main_network_mtl, mtl_libraries,
start = 0, end = 5000, step = 50,
width = 1000, nsim = 50, verbose = FALSE)

kfun_biblio$plotk  plot_df <- kfun_biblio$values

ggplot(plot_df)+
geom_ribbon(aes_string(x = "distances", ymin="lower_k",ymax = "upper_k"),
fill = grDevices::rgb(0.1,0.1,0.1), alpha=0.4)+
geom_path(aes_string(x = "distances", y = "lower_k"), col="black",
linetype="dashed")+
geom_path(aes_string(x = "distances", y = "upper_k"), col="black",
linetype="dashed")+
geom_path(aes_string(x = "distances", y = "obs_k"), col="blue")+
labs(x = "distances",
y = "empirical K-function")


For distances bellow two kilometres, the libraries are a bit dispersed. Above two kilometres, the libraries tend to be randomly located. The chart of the G-function confirms this observation, but with a lower limit (1.3 km) :

kfun_biblio$plotg  ggplot(plot_df)+ geom_ribbon(aes_string(x = "distances", ymin="lower_g", ymax = "upper_g"), fill = grDevices::rgb(0.1,0.1,0.1),alpha=0.4, )+ geom_path(aes_string(x = "distances", y = "lower_g"), col="black", linetype="dashed")+ geom_path(aes_string(x = "distances", y = "upper_g"), col="black", linetype="dashed")+ geom_path(aes_string(x = "distances", y = "obs_g"), col="blue")+ labs(x = "distances", y = "empirical G-function")  The network cross-K-function in spNetwork The cross-K-function is used to determine if two set of points A and B tend to be close or far away one from each other. For a radius r, the empirical cross-K-function is calculated with the following formula : $$\hat{K}(r)=\frac{1}{n_a n_b)} \sum_{i=1}^{n_a} \sum_{j=1}^{n_b} \mathbf{1}\left{d_{i j} \leq r\right}$$ On a network, the formula is adapted: $$\hat{K}(r)=\frac{1}{n_a/Lt} \sum_{i=1}^{n_a} \sum_{j=1}^{n_b} \mathbf{1}\left{d_{i j} \leq r\right}$$ with$n_a$the number of points in A and$n_b$the number of points in B, and$Lt$the total length of the network. Note that the cross-K-function A to B is not necessarily the same results as the cross-K-function B to A. Again, in spNetwork, the inference is based on Monte Carlo Simulations. The locations of the reference set of points are randomized to estimate if the current situation is more or less clustered that what we could expect at random. cross_biblio_theatre <- cross_kfunctions(main_network_mtl, mtl_libraries, mtl_theatres, start = 0, end = 5000, step = 50, width = 1000, nsim = 50, verbose = FALSE) cross_biblio_theatre$plotk

plot_df <- cross_biblio_theatre$values ggplot(plot_df)+ geom_ribbon(aes_string(x = "distances", ymin="lower_k",ymax = "upper_k"), fill = grDevices::rgb(0.1,0.1,0.1), alpha=0.4)+ geom_path(aes_string(x = "distances", y = "lower_k"), col="black", linetype="dashed")+ geom_path(aes_string(x = "distances", y = "upper_k"), col="black", linetype="dashed")+ geom_path(aes_string(x = "distances", y = "obs_k"), col="blue")+ labs(x = "distances", y = "empirical K-function")  One can conclude from the chart that the libraries are randomly located around the theatres and display nor clustering nor dispersion around theatres. cross_theatre_biblio <- cross_kfunctions(main_network_mtl, mtl_theatres, mtl_libraries, start = 0, end = 5000, step = 50, width = 1000, nsim = 50, verbose = FALSE) cross_theatre_biblio$plotk

plot_df <- cross_theatre_biblio\$values

ggplot(plot_df)+
geom_ribbon(aes_string(x = "distances", ymin="lower_k",ymax = "upper_k"),
fill = grDevices::rgb(0.1,0.1,0.1), alpha=0.4)+
geom_path(aes_string(x = "distances", y = "lower_k"), col="black",
linetype="dashed")+
geom_path(aes_string(x = "distances", y = "upper_k"), col="black",
linetype="dashed")+
geom_path(aes_string(x = "distances", y = "obs_k"), col="blue")+
labs(x = "distances",
y = "empirical K-function")


However, this second chart shows that the theatres tend to be clustered around libraries. This is coherent with the map above. A random library is often located far from the theatres. But the theatres are concentrated in the city centre and close to some specific libraries.

# reset all the user parameters
options(backup_option)
setwd(base_wd)
oldpar <- par(mfrow = c(1,2))
par(oldpar)


Try the spNetwork package in your browser

Any scripts or data that you put into this service are public.

spNetwork documentation built on Nov. 11, 2022, 9:13 a.m.