Coloc: data structures

Data structures

The enumeration approaches to coloc coloc.abf and coloc.susie require the same data format. To be flexible, coloc.abf allows a wider variety of inputs, which can sometimes be confusing. This document aims to set out what ideal and acceptable data structures are, as well as covering some points on how you should select the SNPs for study.

First: select the SNPs to study.

SNPs must have summary data available in both studies cover a single genomic region (perhaps defined by distance about some GWAS peak or delimited by recombination hotspots), and * represent a dense coverage of the region

This can result in up to 10,000 SNPs on larger regions. A single genomic region does not correspond to the whole genome, nor to a whole chromosome. Coloc also does not automatically split chromosomes or a genome into regions. It is assumed the user can look at their data, identify a region with overlapping GWAS signals between two studies, and decide on the set of SNPs to include. Some utilities are provided which can help check regions are sensible.

Please do include all SNPs you have in the region: do not trim by significance or MAF or other means. Coloc enumerates all possible configureations of shared and non-shared causal variants and evaluates their relative support; it cannot do this if it does not have all the SNPs available.

A minimum coloc dataset

Colocalisation and fine-mapping work through evaluating approximate Bayes factors summarising evidence for association at each SNP. This requires knowing the estimated effect size $\beta$ (beta) and its uncertainty $var(\beta)$ (varbeta). $var(\beta)$ is the standard error of $\beta$, squared. It is also good practice to supply SNP names (snp), and SNP positions (position) are useful if you want to use coloc's plot_dataset().

We also need a prior on the true effect sizes at causal variants, which is different depending on whether you have a quantitative or case-control (binary) trait. To estimate a prior, we need to know the trait standard deviation (which allows us to interpret the scale of the estimated beta).

A minimum coloc dataset is a list, containing a mix of vectors (values that vary across snps, such as effect sizes beta or variance of beta varbeta) and scalars (values assumed to be constant across snps, such as sample size [N] or data type [type="cc" for case control or type="quant" for quantitative]). See ?check_dataset for the full set of entries, some combination of which are compulsory.

It can be useful to run check_dataset() on each of your datasets if coloc functions aren't running. It will return NULL if it finds no errors. It will stop with error if there are issues that absolutely must be fixed to run coloc, but may print warnings if it sees something merely suspicious - eg if there is no strong signal of association.

Coloc comes with test data, so you can explore the structure for a quantitative trait. Here we show the minimum dataset needed for a quantitative trait.

library(coloc)
data(coloc_test_data)
attach(coloc_test_data)
minimum_data=D1[c("beta","varbeta","snp","position","type","sdY")]
str(minimum_data)
check_dataset(minimum_data,warn.minp=1e-10)

Here we see (from str) that minimum_data is a list. It has vector entries beta, varbeta, snp and position, all of the same length (the number of snps in the region) and scalar entries for type and sdY (the standard deviation of the quantitative trait).

check_dataset() issues a warning that the minimum p value exceeds warn.minp. (The default value for warn.minp is 10^{-6}). The warning doesn't mean you can't run coloc - it is perfectly valid to assess that there is only evidence for association in one of your datasets, but it may alert you to check something if you thought there was strong association there. One common mistake is to use the standard error of beta in place of the variance of beta. If your dataset provides the standard error, simply square it to get the variance.

It's also useful to plot your datasets, and check coverage is dense the level of association matches your expectation

plot_dataset(minimum_data)

For a case control trait, you would need to give the type as "cc":

minimum_ccdata=D1[c("beta","varbeta","snp","position")]
minimum_ccdata$type="cc"
str(minimum_ccdata)
check_dataset(minimum_ccdata)

In either case, you can see that the lengths of beta, varbeta, snp and position are the same. They are assumed to represent the same snps in the same order. If you have your data in a data.frame, you could use as.list() to convert to a list, and then add the other elements, but you cannot pass a data.frame to coloc, because elements like type need to be of length 1.

Analysing two datasets

coloc is used to analyse exactly two datasets. The snp identifiers are used to match snps between datasets, and only the snps that appear in both datasets will contribute to the analysis.

What if I don't have sdY?

Often, sdY is not available for quantitative datasets. If the study say they standardised their trait to have variance 1, then you can set =sdY= to 1. Otherwise coloc can estimate it, but needs MAF and sample size information too. So the dataset would look like:

nosdY_data=D1[c("beta","varbeta","snp","position","type","N","MAF")]
str(nosdY_data)
check_dataset(nosdY_data)

What if I don't have beta and/or varbeta?

beta and varbeta are preferred. Please supply them if you have them, especially in the case of imputed data where they capture the effects of imperfect imputation. But if you don't have them, coloc can estimate them, given p values, MAF, sample size and, if case-control data, the fraction of samples that are cases:

nobeta_data=D1[c("MAF","snp","position","type","sdY","N")]
nobeta_data$pvalues=pnorm(-abs(D1$beta/sqrt(D1$varbeta)))*2
str(nobeta_data)
check_dataset(nobeta_data)

nobeta_ccdata=D1[c("MAF","snp","position","N")]
nobeta_ccdata$pvalues=pnorm(-abs(D1$beta/sqrt(D1$varbeta)))*2
nobeta_ccdata$type="cc"
nobeta_ccdata$s=0.5
str(nobeta_ccdata)
check_dataset(nobeta_ccdata)

Note that coloc doesn't mind if your dataset has more entries than it minimally needs, it will use what it needs, preferring supplied beta/varbeta and sdY over estimation, and leave the rest.

Additional LD information for coloc.susie

coloc.abf makes the simplifying assumption that each trait has at most one causal variant in the region under consideration. This means it does not need to know about correlation (LD) between SNPs, because no model under consideration has two or more SNPs in it. coloc.susie extends the functionality by allowing more than one causal variant, but this means it needs to know the LD between the SNPs. You may be able to get this from the study data, but if not, reference data such as 1000 Genomes can be used.

Our test data has an LD matrix already. This will be a square numeric matrix of dimension equal to the number of SNPs, with dimnames corresponding to the SNP ids.

str(D1$LD)

NB studies from different populations

One of the nice things about coloc.abf is that it does not assume that LD structures are similar between studies, as long as there is a dense map of SNPs across the region. The same thing still applies to coloc.susie, just add an appropriate LD matrix to each study.

NB allele order matters!

beta coefficients in GWAS studies report the effect of one allele with respect to the other. That is, if you see results looking like

|CHR38|BP38|REF|ALT|SNPID|P|BETA|SE|maf|maf_cases|maf_controls| |-|---|----|---|---|-----|-|----|--|---|---------|------------| |1|2101817|G|A|rs908742|0.0826|0.0749|0.0432|0.4394|0.456|0.4391| |1|2109497|T|C|rs4648808|0.8695|-0.0144|0.0877|0.9347|0.9344|0.9347| |1|2126584|A|G|rs3128291|0.7334|-0.0306|0.0897|0.939|0.9371|0.9391| |1|2137467|G|T|rs3128296|0.8802|-0.0124|0.0826|0.9268|0.9267|0.9268| |1|2139901|C|A|rs424079|0.6399|-0.0207|0.0442|0.6347|0.6269|0.6348|

the beta is telling you about the effect of allele A compared to allele G at the snp rs908742. If the alleles were reversed, beta would be -0.0826. The LD matrix needs to be aligned the same way. This will be easy if you have the GWAS data and are making the LD matrix yourself. If you get it from a public source, it will almost certainly be telling you about the LD between non-reference alleles. In this case, you need to make sure your data is also listing the non-reference allele as the "alternative" or "risk" allele. If it is not, switch the sign of beta.

To avoid hassles, I recommend: if using GWAS catalog data, download the harmonised version which will do this for you. if using eQTL summary data that has been processed by the eQTL catalogue, use that version because it will also be harmonised Otherwise, check the alleles in your summary table match those in the information files from the LD source Finally, always plot the coloc result with the sensitivity function because weird effects are much easier to understand visually

You can also use the coloc function check_alignment as a visual guide. It compares the product of the Z scores for all SNP pairs against their correlation, and plots a histogram of this ratio for SNPs in some degree of LD. We do not expect to see strongly negative products of Z scores for strongly positive correlations or vice versa. Therefore this plot should be skewed to have more positive values than negative. Here I show a good (left) and bad (right) example.

goodD=D1
rsign=sample(c(1,-1),length(goodD$beta),replace=TRUE)
goodD$beta=goodD$beta * rsign
goodD$LD=goodD$LD * outer(rsign,rsign,"*")
badD=goodD
rsign=sample(c(1,-1),length(goodD$beta),replace=TRUE)
badD$beta=rsign * goodD$beta
par(mfrow=c(1,2))
check_alignment(goodD)
text(40,200,"good",col="red",cex=4)
check_alignment(badD)
text(0,200,"bad",col="red",cex=4)


Try the coloc package in your browser

Any scripts or data that you put into this service are public.

coloc documentation built on Oct. 3, 2023, 5:07 p.m.